-
Standard Canadian flag size is 36 x 72.
It should fly between 20 25 from ground level.
-
The Canadian flag length should always be 2xs the
width. It is fashioned
after the proportions of the British Union Jack.
-
The side of the flag that attaches to the pole or the
halyard is called the hoist or heading.
-
The side of the flag that flaps is called the fly end.
-
When an uneven number of flags are flying in a row the
Canadian flag should fly in the centre or when flown within an even
number the Canadian flag should fly on the far left as the public is
viewing it. The left hand
position is the position of respect or prominence.
-
When two or more flags are to be flown on one pole the
Canadian flag should be flown on the top and should be the same size
or larger.
-
Breaking a flag an example of this can be found HERE
-
Flying a flag at half-mast should only be done on
flagpoles fitted with a halyard and pulley system. The flag should be hoisted to the top of the pole and then
immediately lowered to a position that is easily recognized as half
mast.
-
When a flag becomes worn and tattered it must be
disposed of in a dignified manner.
-
The average life span of an outdoor flag is dependent
on the conditions it must endure at its individual location.
Wind, sun, snow and ice as well as dirt and pollutants in the
air can restrict the longevity of a flag.
An average flag should be replaced once to twice per year.
-
Oversized or larger heavier flags will require
replacing more often than smaller ones.